Solution Finder Get Tech Support

Application Notes

Showing 1 - 20 of 33 Application Notes
Description
AN-100 - InnoSwitch4-Pro Toggle Board (TST-047) User's Guide
Description

This manual is describes what constitutes the TST-047 toggle board, how it works and how to use it with InnoSwitch4-Pro family of offline switcher IC devices. It also contains the schematic, bill of materials, printed circuit board layout.

AN-101 - InnoSwitch4-Pro Master Debugger User's Guide
Description

This guide will allow the user to get sufficient knowledge on how to operate the devices with the use of a simple microcontroller such as Arduino. The microcontroller used is an Arduino Mega 2560 to satisfy the memory requirement of the master debugger file.

AN-102 - InnoSwitch3-Pro/InnoSwitch4-Pro Arduino Code Library Overview and Guide
Description

The application of InnoSwitch3-Pro and InnoSwitch4-Pro Family Arduino Library is discussed in this document. This code was designed to be highly portable with different microcontroller platforms.

AN-103 - InnoSwitch4-Pro PIC16F18325 Code Library Overview and Guide
Description

This document discusses the application of Peripheral Interface Controller (PIC) library for the InnoSwitch4-Pro IC family. This library can be used with both the InnoSwitch3-Pro and InnoSwitch4-Pro family of devices. This code was designed to be highly portable with different microcontroller platforms.

AN-104 - InnoSwitch4-Pro Family Programming Manual
Description

This manual describes the software implementation including driver libraries used to control InnoSwitch4-Pro operations. Important aspects of this document are calculations for the values to be programmed for various configurations such as voltage, current, cable drop compensation, constant power, I²C command sequences to prevent any unexpected behaviors, device responses and code examples.

AN-109 - LinkSwitch-XT2SR Family Non-Isolated Flyback Design Guide
Description This application note is intended to guide engineers through a step-by-step design process of designing non-isolated AC-DC flyback power supply using the LinkSwitch-XT2SR family of devices.
AN-300 - Qspeed High Temperature Reverse Bias (HTRB) Reliability Testing
Description

Qspeed High Temperature Reverse Bias (HTRB) Reliability Testing

AN-301 - Qspeed Reverse Recovery Charge, Current and Time
Description

Reverse Recovery Charge, Current and Time

AN-302 - Qspeed Reverse Voltage Sharing of Series Rectifiers
Description

Reverse Voltage Sharing of Series Rectifiers

AN-303 - Qspeed Family RoHS Compliant Soldering Considerations
Description

Qspeed Family RoHS Compliant Soldering Considerations

AN-31 -DPA-Switch Forward Converter Design Guide
Description DPA-Switch Forward Converter Design Guide
AN-39 - LinkSwitch-LP Design Guide
Description LinkSwitch-LP Design Guide
AN-43 - TOPSwitch-HX Design Guide
Description TOPSwitch-HX Design Guide
AN-45 - LinkSwitch-CV Design Guide
Description LinkSwitch-CV Design Guide
AN-47 - TOPSwitch-JX Application Note
Description

TOPSwitch-JX Application Note

AN-55 - HiperLCS Family Design Guide
Description

HiperLCS Family Design Guide

AN-58 - LinkSwitch-HP Design Guide
Description

This application note is intended for engineers designing an isolated AC-DC flyback power supply using LinkSwitch-HP devices. It provides guidelines to enable an engineer to quickly select key components and also complete a suitable transformer design.

AN-61 - LinkSwitch-3 Family Design Guide
Description

LinkSwitch-3 Family Design Guide

AN-70 - LinkSwitch-TN2 Design Guide
Description

This document describes the design procedure for buck and buck-boost converters using the LinkSwitch-TN2 family of integrated off-line switchers.

AN-72 - InnoSwitch3 Family Design Guide
Description

This application note is intended for engineers designing an isolated AC-DC flyback power supply or charger using the InnoSwitch3 family of devices. It provides guidelines to enable an engineer to quickly select key components and also complete a suitable transformer design.